top of page

Pro Stock Rules

Pro Stock:

  1. Hood and windshield required.

  2. PPE – Arms and Legs must be covered – Non Polyester material

  3. OEM structure must be recognizable

  4. Fibreglass body’s or tube frames not allowed.

  5. Wheelbase must remain to body length. Wheels must fit under wheel wells.

  6. Body swaps allowed.

  7. Tires must be DOT approved and limited to 38” in diameter

  8. No cut paddle or pivot tires.

  9. No lift limit

  10. No blowers or aftermarket turbo’s,

  11. No nitrous – remove bottle, alcohol etc),

  12. Gas, Diesel, and VP allowed

  13. Propane may be used but only as primary fuel source! (No injection)

  14. 300 hp (## sea-level hp) limit rear wheel (ACTUAL)

  15. Driveline loops required. U-joint guards on differentials mandatory.

  16. No frame extensions

  17. Transmission shield required only if transmission brake present.

  18. Must also meet all required points in vehicle rules.

bottom of page